Steps to avoid cuts in the Wifi
Normally the continuous cuts in the WiFi can be easily fixed. They usually appear for a reason and we always have an option to solve it. Some change in the configuration, use a device, change the place of the device… Some small steps that will make the connection improve significantly.
Use the correct band
The first step you should take to avoid unstable WiFi is to use the correct band. Wireless networks today can operate in most cases on the frequency of 2.4GHz and of the 5GHz. We can say that the first one is the best when you connect very far from the router, since it is less sensitive to distance and possible obstacles. Of course, it will offer a lower speed. Instead, the 5 GHz is the fastest, but it is much more sensitive to distance.
As you can see, choosing one or the other can make your WiFi connection work better. If you have continuous cuts, it is the first thing you should look at. Perhaps you are connected to the 5 GHz band and you are too far from the router and if you change to the 2.4 GHz band you will notice a significant improvement in signal stability.
Change the WiFi channel
Another issue to take into account is the Wi-Fi channel to which you are connected. Especially if you use the 2.4 GHz band, you will more often experience interference. It basically means that your neighbors are using the same or a very close channel for their connections and that is going to create problems.
Therefore, our advice is to analyze the best WiFi channel and connect to the one that is freest. This will undoubtedly help make the connection more stable and prevent annoying cuts from appearing. You’ll also get faster speeds when browsing wirelessly.
Put the router somewhere else
Undoubtedly a very important factor is the router location. This can determine that better or worse coverage reaches the different places of a home. If you have it poorly located, it can generate limitations and the signal arrives very weak. That would cause continuous cuts and instability.
Ideally, the router should be in a central location in the home. From there you can correctly distribute the signal so you can connect other devices. In addition, it is interesting that it is in an elevated position, such as on top of a piece of furniture, as well as away from other electronic devices that may interfere.
Use some device to improve the signal
You can always choose to use some device with the power improve wireless connection. Here you will have different options and not all of them will be useful depending on the case. You will be able to use a WiFi repeater, Mesh systems, PLC devices or even use an old router to act as an access point.
If you are going to connect very far from the router, the ideal is to use PLC devices, which use the power line, or a router as an access point connected to the main one. A Mesh system is also ideal for covering a very large area and a WiFi repeater may be sufficient for a specific area where you need to amplify the signal.
Make sure everything is up to date
You have all devices updated? This is also critical to prevent WiFi from malfunctioning. You must make sure you have the latest version of the operating system, but also update the router and the network card to achieve optimal performance and that problems do not appear.
If you use an outdated version or a device that does not work well because it is out of date, you may also have security problems. Therefore, it is a factor that you must take into account whenever you are going to connect to the Internet.