The Samsung company maintains various electronic items on the market at the service of its users. It is a brand that has gained much recognition throughout the world. Well, their devices have proven to be of excellent quality and very helpful at home, in the office and especially in telecommunications such as televisions. If he Samsung TV won’t turn on and led blinkshere we offer you the solution for that.
Despite being a well-known brand for the quality of its electronic devices, it does not escape the possibility of presenting faults. In this case we are going to refer to Samsung Televisions in their most common presentations.
Electrical appliances are always exposed to deterioration due to different factors, some due to manufacturing details.
For this reason, there are failures in Samsung televisions that can be very common cases and that may be due to programming or design.
But don’t worry because there are easy solutions that you can do yourself. Without needing to be an electronics technician, you can easily repair it by following the instructions that we will give you in this article.
Some of the major drawbacks mentioned by Samsung TV users it is the fact that Disney Plus cannot be downloaded, it raises or lowers the volume by itself or that the device does not turn on and the LED flashes continuously.
In this case we can follow some basic and simple indications to rule out the possibility of larger and more complex failures. Here are some possible solutions to get the TV to turn on.
Discard options on the Samsung TV that does not turn on
First, we can verify that the power input is working correctly without some kind of short circuit or low current that prevents supplying enough energy to make the TV turn on.
It is also necessary to verify if there is any external device connected to the TV that this consuming power and interrupting the ignition.
For this reason it is recommended completely disconnect any device additional external such as a USB hard drive or other HDMI connection. If we still do not get a solution, it may be necessary to drain the energy in the following way: we disconnect the power plug. We take control of the TV and press the power button, leaving it pressed for 30 seconds.
Then connect the cable and turn on the screen. If it flashes and turns off, turn it on again and it won’t turn off anymore.
This is due to the fact that inside the filters they have an overvoltage, when turning on the TV the system detects an abnormal high voltage and protects the device by generating a blockage. Thanks to this lock the TV is protected from faults by unexpected voltage surges.
With this procedure, the excess energy is released and the operation of the device is normalized. If with these steps the TV still does not turn on. Take advantage of the guarantee so that they can carry out other more complex fault detection and correction procedures.
What to do if my Samsung TV still won’t turn on and the LED blinks?
If the warranty has already expired and you cannot use it, it will be better to check the internal part of the Samsung TV to verify if there is any damage there.
Now, these steps are not complicated, more if necessary be very careful and cautious when handling the electrical part. So if you don’t know something basic about the subject, turn to a specialized technician to repair the fault.
But if you decide to take the risk, locate the necessary tools such as screwdrivers and a voltmeter to start the procedure. Remove all the screws on the back of the computer and remove the cover to expose all the electronic part where we will verify the origin of the failure. In this case we must verify the voltages, the multimeter is placed on terminal 16 corresponding to the standby voltage.
If the voltage is correct, we proceed to test the secondary voltage corresponding to pin 14, it will be tested by pressing the Powers button to see its voltage.
In these cases, depending on the voltages provided, we can verify where the fault is and replace the corresponding item on the card according to the case. This last process is deeper and you need to know about voltage and the elements that make up the card.